Normally Off AlGaN/GaN MIS-High-Electron Mobility Transistors Fabricated by Using Low Pressure Chemical Vapor Deposition Si<sub>3</sub>N<sub>4</sub> Gate Dielectric and Standard Fluorine Ion Implantation

Abstract

This letter presents a fabrication technology of enhancement-mode (E-mode) AlGaN/GaN metal-insulator- semiconductor high-electron mobility transistors (MIS-HEMTs) using 10 keV fluorine ion implantation. An 8 nm low-pressure chemical vapor deposition silicon nitride layer was deposited on the AlGaN as gate dielectric and energy-absorbing layer that slows down the high energy (10 keV) fluorine ions to reduce the implantation damage. The E-mode MIS-HEMTs exhibit a threshold voltage as high as +3.3 V with a maximum drain current over 200 mA/mm (250 mA/mm for depletion-mode MIS-HEMTs) and a high on/off current ratio of 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">9</sup> . Meanwhile, the E-mode MIS-HEMT dynamic R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">ON</sub> is only 1.53 times larger than the static R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">ON</sub> after off-state V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">DS</sub> stress of 500 V.