Evaluation on Influencing Factors of Board-Level Drop Reliability for Chip Scale Packages (Fine-Pitch Ball Grid Array)

Abstract

Board-level drop testing is an effective method to characterize the solder joint reliability performance of miniature handheld products. In this study, drop test of printed circuit boards (PCBs) with a four-screw support condition was conducted for a 15 mm times 15 mm fine-pitch ball grid array (FBGA) package assembly with solder ball compositions of 36Pb-62Sn-2Ag and Sn-4Ag-0.5Cu on printed circuit board (PCB) surface finishes of organic solderability preservative, electroless nickel immersion gold, and immersion tin. Finite element modeling of the FBGA assembly was performed to study the stress-strain behavior of the solder joints during drop test. The drop test results revealed a strong influence of different intermetallic compound formation on soldered assemblies drop durability. The lead-based solder supersedes the lead-free composition regardless of the types of surface finish. Joints on organic solderability preservative were found to be strongest for each solder type. Other factors affecting drop reliability such as component location on the board and thermal cycling aging effects are reported. Finite element modeling results showed that a solder joint is more prone to failure on the PCB side, and the predicted solder joint stresses are location dependent. Predicted failure sites based on simulation results are consistent with experimental observations.