2014 · 23 citations · 14 references
EngineeringMechanical EngineeringRobotics EngineeringRobot DesignRobot KinematicsRoboticsInverse KinematicsKinematic ModelingKinematic SynthesisManipulator DesignRedundancy ResolutionRobot ManipulatorsAnalytical Inverse KinematicsContinuum Robot DesignInverse Kinematics Of Continuum RobotsManipulator ModelingRobot Kinematic ModelingRobot Manipulator DesignRobot Pose RepresentationSequential Quadratic Programming
This paper presents a development of Inverse Kinematic Model (IKM) of a class of Continuum Bionic Handling Arm (CBHA). The modeling approach is inspired from a model of a hyper-redundant backbone-based manipulator, combined with an optimal placement of the backbones. The latter is obtained using an optimization algorithm, based on a Sequential Quadratic Program (SQP). The main interest of developing such model is to design an autonomous control of the CBHA. The high number of Degrees of Freedom (DoF) present on the continuum structure of the CBHA, makes difficult the synthesis of the analytical IKM for the overall arm. To resolve this issue, it is proposed to assimilate the CBHA's behavior to that of a hyper-redundant robot manipulator. This robot is represented by a concatenation of hybrid (parallel and serial) vertebrae along the vertebral column or backbones of the CBHA. The combination of all these vertebra allows the reconstruction with optimal configuration of the real posture of the continuum arm inside its workspace, with only the knowledge of the Cartesian coordinates of the robot pose. Simulations and experimental validation of the model demonstrate the efficiency of the modeling approach for this class of CBHA.
14
Closed-Form Inverse Kinematics for Continuum Manipulators
Srinivas Neppalli, M. Csencsits, Bryan A. Jones et al. · Advanced Robotics · 2009 · 178 citations
Engineering, Mechanical Engineering, Robotics Engineering +16