Japanese Journal of Applied Physics · 2005 · 25 citations · 32 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsInterface ScienceSemiconductor DevicesEtching ProcessesHigh-temperature PlasmasPlasma Surface TreatmentPlasma-surface InteractionsThin Film EtchingDry EtchingEtch MechanismsEtch RateEtch SelectivityEtchingPlasma EtchingSelective EtchingSurface Etching
The dry etching characteristics of the TaN/HfO 2 gate stack structure using Cl 2 /Ar, Cl 2 /SF 6 /Ar and Cl 2 /SF 6 /O 2 /Ar inductively coupled plasmas (ICPs) were investigated and the etch rates of the TaN and HfO 2 layers and TaN/HfO 2 etch rate selectivities were compared. The results obtained for the TaN/HfO 2 etching by varying the Cl 2 /Ar gas mixing ratio, the top ICP electrode power, and the dc self-bias voltage ( V dc ) in the Cl 2 /Ar plasmas showed that low etch selectivities were obtained, due to the high HfO 2 etch rate. The effects of adding SF 6 to the Cl 2 /Ar plasmas and adding O 2 flow to the SF 6 /Cl 2 /Ar chemistry were investigated for the purpose of improving the etch selectivity. Etch experiments performed by varying the Cl 2 /SF 6 /Ar gas mixing ratio and V dc value in SF 6 /Cl 2 /Ar plasmas, combined with X-ray photoelectron spectroscopy measurements, showed that the etch rates were reduced compared to those in Cl 2 /Ar chemistry, due to the heavy fluorination of the surface, however the etch selectivity was increased, due to a disproportionate decrease in the TaN and HfO 2 etch rates. The addition of O 2 flow to the SF 6 /Cl 2 /Ar plasma also increased the etch selectivity at an O 2 flow rate of 5 sccm, due to the TaN etch rate being increased, while the HfO 2 etch rate remained almost constant.
32
Physical and electrical properties of metal gate electrodes on HfO2 gate dielectrics
J. Schaeffer, S. Samavedam, D. C. Gilmer et al. · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · 2002 · 100 citations
Engineering, Electrical Engineering, Materials Engineering +17