Electronics · 2021 · 49 citations · 56 references
EngineeringAutomotive EngineeringAutonomous SystemsAutonomous VehiclesPath PlanningVehicle DynamicsActuator ControlModel Predictive ControlMotion ControlOptimal ControlVehicle ControlVehicle Control SystemsAutonomous Vehicle ControlFour-wheel SteeringFour-wheel Steering ControlIntegrated ControlSteering ControlVelocity ControlYaw RateYaw Rate Dynamics
This paper presents an MPC-based integrated control algorithm for an autonomous vehicle equipped with four-wheel independent steering and driving systems. The objective of this research is to improve the performance of the path and velocity tracking controllers by distributing the control effort to the multiple actuators. The proposed algorithm has two modules: reference state decision and MPC-based vehicle motion controller. Reference state decision module determines reference state profiles consisting of yaw rate and velocity in order to overcome the limitation of the error dynamics-based path tracking controller, which requires several assumptions on the reference path. The MPC-based vehicle motion controller is designed with a linear time-varying vehicle model in order to optimally allocate the control effort to each actuator. A linear time-varying MPC is adopted to reduce computational burden caused by using a non-linear one. The effectiveness of the proposed algorithm is validated via simulation on MATLAB/Simulink and CarSim. The simulation results show that the proposed algorithm improves the reference tracking performance by effectively distributing the control effort to the steering angle and driving force of each actuator.
56
A Survey of Autonomous Driving: <i>Common Practices and Emerging Technologies</i>
Ekim Yurtsever, Jacob Lambert, Alexander Carballo et al. · IEEE Access · 2020 · 1.7K citations · Full text
Path planning for autonomous vehicles using model predictive control
Chang Liu, Seungho Lee, Scott Varnhagen et al. · 2017 · 239 citations