Applied Physics Letters · 2019 · 15 citations · 33 references
Natural SciencesMaterials EngineeringMaterials ScienceNanotechnologySurface ScienceThin FilmsAtomic Layer DepositionNanostructured SurfacesThin Film EtchingThin-film DepositionThin-film MaterialsDeposition CyclesMetal Thin FilmsPlasma-enhanced Atomic Layer DepositionPlasma-enhanced DepositionSelective DepositionSputteringSputtering ProcessesSputtering Techniques
In this paper, we present a topographically Selective Deposition process which allows the vertical only coating of three-dimensional (3D) nano-structures. This process is based on the alternate use of plasma enhanced atomic layer deposition (PEALD) and sputtering carried out in a PEALD reactor equipped with a radio-frequency substrate biasing kit. A so-called super-cycle has been conceived, which consists of 100 standard deposition cycles followed by an anisotropic argon sputtering induced by the application of a 13.56 MHz biasing waveform to the substrate holder in the PEALD chamber. This sputtering step removes the deposited material on horizontal surfaces only, and the sequential deposition/etch process allows effective deposition on vertical surfaces only. Thus, it opens up a route for topographically selective deposition, which can be of interest for the fabrication of 3D vertical Metal-Insulator-Metal devices.
33
Plasma-Assisted Atomic Layer Deposition: Basics, Opportunities, and Challenges
Harald B. Profijt, Stephen E. Potts, M. C. M. van de Sanden et al. · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 2011 · 881 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +15
Perspective: New process technologies required for future devices and scaling
Robert D. Clark, Kandabara Tapily, K.H. Yu et al. · APL Materials · 2018 · 192 citations · Full text