2005 · 82 citations · 22 references
EngineeringComputer EngineeringComputer ScienceFault-tolerant ComputingTest ConstructionTest DevelopmentDesign For TestabilityFunctional VerificationStructural TestingTiming AnalysisAutomatic Test Pattern GenerationConstraintsCorrelationCrosstalkDelay Fault TestingFunctional ConstraintsScan DesignTiming Faults
Recent research results have shown that the traditional structural testing for delay and crosstalk faults may result in over-testing due to the non-trivial number of such faults that are untestable in the functional mode while testable in the test mode. This paper presents a pseudo-functional test methodology that attempts to minimize the over-testing problem of the scan-based circuits for the delay faults. The first pattern of a two-pattern test is still delivered by scan in the test mode but the pattern is generated in such a way that it does not violate the functional constraints extracted from the functional logic. In this paper, we use a SAT solver to extract a set of functional constraints which consists of illegal states and internal signal correlation. Along with the functional justification (also called broad-side) test application scheme, the functional constraints are imposed to a commercial delay-fault ATPG tool to generate pseudo-functional delay tests. The experimental results indicate that the percentage of untestable delay faults is non-trivial for many circuits which support the hypothesis of the over-testing problem in delay testing. The results also indicate the effectiveness of the proposed constraint extraction method.
22
Matthew W. Moskewicz, Conor Madigan, Ying Zhao et al. · 2001 · 2.9K citations
Too much delay fault coverage is a bad thing
Jeff Rearick · 2002 · 264 citations
Engineering, Computer Engineering, Electrical Engineering +17