physica status solidi (b) · 2009 · 167 citations · 47 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsDefects In Electronic MaterialsDislocations In SemiconductorsDopingEpitaxial GrowthSemiconductor DefectsSemiconductor Device MaterialsDislocationsDoping UniformityEpitaxial DefectsEpitaxial Film GrowthEtchingExtended DefectsSilicon CarbideSilicon Carbide (Sic) Materials
Abstract This paper surveys extended defects in 4H‐SiC epilayers and reports recent results concerning fast epitaxial growth. Synchrotron X‐ray topography, transmission electron microscopy, Nomarski optical microscopy and defect selective etching analysis are applied to investigate the nucleation and propagation of carrot defects, basal plane Frank‐type defects, polytype inclusions and basal plane dislocations (BPDs) in 4H‐SiC epitaxial growth. In the development of the 4H‐SiC fast epitaxial growth technique, a very high growth rate of up to 250 μm/h is obtained in a newly developed vertical hot‐wall‐type reactor under low system pressure using a H 2 + SiH 4 + C 3 H 8 system. Good thickness and impurity doping uniformity are also obtained simultaneously over a large area, with the retention of a high growth rate. A 4H‐SiC epilayer virtually free from BPDs is obtained on a 4° off Si‐face substrate. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
47
Degradation of hexagonal silicon-carbide-based bipolar devices
Marek Skowroński, S. Ha · Journal of Applied Physics · 2006 · 466 citations
Long Term Operation of 4.5kV PiN and 2.5kV JBS Diodes
H. Lendenmann, Fanny Dahlquist, Nils Johansson et al. · Materials science forum · 2001 · 262 citations
Engineering, Electrical Engineering, Semiconductor Devices +4
Dislocation conversion in 4H silicon carbide epitaxy
S. Ha, P. Mieszkowski, Marek Skowroński et al. · Journal of Crystal Growth · 2002 · 238 citations