IEEE Transactions on Electron Devices · 2023 · 13 citations · 22 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsMicroelectronicsSemiconductor DevicesComplementary Metal-oxide-semiconductor TechnologyDevice CharacterizationField-effect TransistorsIntegrated Circuit DesignMetal-oxide-semiconductor Field-effect TransistorsWide Band Gap SemiconductorsGate Oxide LeakageGate Oxide Leakage ReductionJunction Field-effect TransistorsLeakage Current ReductionSilicon CarbideSwitching Loss Reduction
In this article, a 1200-V asymmetric trench (AT) silicon carbide (SiC) metal–oxide–semiconductor field effect transistor (MOSFET) with an integrated junction field effect transistor (JFET) is proposed with improved cut-in voltage ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {cut-in}}$ </tex-math></inline-formula> ) and switching loss. For the proposed device named IJ-ATMOS, the bottom p-well in contact with the source can deplete the surrounding current spreading layer (CSL) region, so the JFET channel (JFET-C) is normally- OFF when device is in forward operation. In addition, the source is in contact with CSL. Due to a smaller potential barrier, <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {cut-in}}$ </tex-math></inline-formula> of this path is lower than the p-n body diode. Therefore, the intrinsic body diode is fully inactivated and the bipolar degradation is eliminated. Meanwhile, the gate to drain charge ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${Q}_{\text {gd}}$ </tex-math></inline-formula> ) and switching loss are reduced by using the split gate MOSFET structure. Through TCAD simulation, the IJ-ATMOS decreases <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {cut-in}}$ </tex-math></inline-formula> by 50.35% compared to the conventional AT SiC MOSFET (C-ATMOS). The <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${Q}_{\text {gd}}$ </tex-math></inline-formula> and the switching loss are decreased by 14.29% and 30.61%, respectively.
22
Performance and ruggedness of 1200V SiC — Trench — MOSFET
Dethard Peters, Ralf Siemieniec, Thomas Aichinger et al. · 2017 · 149 citations
Engineering, Electrical Engineering, Materials Engineering +17