Applied Physics Letters · 2017 · 21 citations · 27 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsAtomic Layer DepositionDopingMos CapacitorsSemiconductor Device MaterialsSemiconductor InterfacesSemiconductor PhysicsAnnealingElectronic Trap StatesFermi LevelGate DielectricsInterface Trap DensityInterface Trap StatesSulfur PassivationTrap States
This study reports the impact of forming gas annealing (FGA) on the electrical characteristics of sulfur passivated, atomic layer deposited Al2O3 gate dielectrics deposited on (110) oriented n- and p-doped In0.53Ga0.47 As layers metal-oxide-semiconductor capacitors (MOSCAPs). In combination, these approaches enable significant Fermi level movement through the bandgap of both n- and p-doped In0.53Ga0.47 As (110) MOSCAPs. A midgap interface trap density (Dit) value in the range 0.87−1.8×1012 cm−2eV−1 is observed from the samples studied. Close to the conduction band edge, a Dit value of 3.1×1011 cm−2eV−1 is obtained. These data indicate the combination of sulfur pre-treatment and FGA is advantageous in passivating trap states in the upper half of the bandgap of (110) oriented In0.53Ga0.47 As. This is further demonstrated by a reduction in border trap density in the n-type In0.53Ga0.47 As (110) MOSCAPs from 1.8×1012 cm−2 to 5.3×1011 cm−2 as a result of the FGA process. This is in contrast to the observed increase in border trap density after FGA from 7.3×1011 cm−2 to 1.4×1012 cm−2 in p-type In0.53Ga0.47 As (110) MOSCAPs, which suggest FGA is not as effective in passsivating states close to the valence band edge.
27
Kelin J. Kuhn, M.D. Giles, D. Becher et al. · IEEE Transactions on Electron Devices · 2011 · 365 citations
Engineering, Computer Engineering, Electrical Engineering +17
III–V compound semiconductor transistors—from planar to nanowire structures
Heike Riel, Lars‐Erik Wernersson, M. Hong et al. · MRS Bulletin · 2014 · 231 citations