Applied Physics Letters · 2004 · 242 citations · 12 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsSemiconductor Device MaterialsSemiconductor InterfacesSemiconductor PhysicsSurface PassivationWide Band Gap SemiconductorsWide-bandgap Semiconductor DevicesBreakdown VoltageHigh-electron-mobility TransistorsHysteresisHysteresis EffectsPassivationPlasma-enhanced Chemical Vapor DepositionSurface EffectsSurface Passivation Layers
Surface passivation effects were studied on AlGaN/GaN high-electron-mobility transistors (HEMTs) using SiO2, Si3N4, and silicon oxynitride (SiON) formed by plasma enhanced chemical vapor deposition. An increase of IDmax and gmmax has been observed on the passivated (SiO2, Si3N4 and SiON) HEMTs when compared with the unpassivated HEMTs. About an order of magnitude low IgLeak and three orders of magnitude high IgLeak was observed on Si3N4 and SiO2 passivated HEMTs, respectively, when compared with the unpassivated HEMTs. The increase of IgLeak is due to the occurrence of surface related traps, which was confirmed by the observation of kink and hysteresis effect on dc and ac IDS–VDS characteristics, respectively. Though the Si3N4 passivated HEMTs show better dc characteristics, the breakdown voltage (BVgd) characteristics are not comparable with SiO2, SiON passivated and unpassivated HEMTs. The SiON is also a very promising candidate as a surface passivant for AlGaN/GaN HEMTs because it shows better BVgd with low hysteresis width and small ID collapse than Si3N4 passivated HEMTs.
12
A comparative study of surface passivation on AlGaN/GaN HEMTs
Wu Lu, V. Kumar, R. Schwindt et al. · Solid-State Electronics · 2002 · 136 citations