Japanese Journal of Applied Physics · 1992 · 19 citations · 10 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsSurface ScienceThin FilmsCoatingsThin Film AnnealingThin Film Mechanical PropertiesThin-film DepositionThin-film MaterialsAbsorber MaterialsAmorphous Thin FilmsAnnealingFilm StressPower DensitySputteringStressThin-film Absorbers
Properties of DC-sputtered W-Ti absorber films such as internal stress, density and microstructure were systematically investigated for X-ray mask application. Smooth, stress-free amorphous W-Ti films with a comparatively high density of 16.5-17.0 g/cm 3 were obtained by optimizing several conditions: gas pressure, N 2 content in the working gas, DC power density and annealing temperature. The reproducibility of the film stress was about ±5×10 7 Pa. Reproducibility was found to be mainly determined by the degree to which the sputtering tool used could be controlled. Furthermore, it was confirmed that the optimized absorber films offered good stability under stress within 1×10 7 Pa when stored in an air atmosphere for more than 250 days.
10
Stable low-stress tungsten absorber technology for sub-half-micron x-ray lithography
R. R. Kola, G. K. Celler, J. Frackoviak et al. · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · 1991 · 29 citations
Natural Sciences, Materials Engineering, Materials Science +13
Ta Film Properties for X-Ray Mask Absorbers
M. Oda, Akira Ozawa, Shigehisa Ohki et al. · Japanese Journal of Applied Physics · 1990 · 28 citations
Natural Sciences, Materials Engineering, Materials Science +8