Applied Optics · 2009 · 19 citations · 16 references
EngineeringMaterials ScienceBiomedical OpticsMetrologyOpticsOptical AberrationsOptical MetrologyCoherent ImagingComa AberrationMeasurementOptical LithographyPhase Shift MasksPhase-shift LithographyProjection LithographySensitivity
The correlation between the coma sensitivity of the alternating phase-shifting mask (Alt-PSM) mark and the mark's structure is studied based on the Hopkins theory of partially coherent imaging and positive resist optical lithography (PROLITH) simulation. It is found that an optimized Alt-PSM mark with its phase width being two-thirds its pitch has a higher sensitivity to coma than Alt-PSM marks with the same pitch and the different phase widths. The pitch of the Alt-PSM mark is also optimized by PROLITH simulation, and the structure of p=1.92lambda/NA and pw=2p/3 proves to be with the highest sensitivity. The optimized Alt-PSM mark is used as a measurement mark to retrieve coma aberration from the projection optics in lithographic tools. In comparison with an ordinary Alt-PSM mark with its phase width being a half its pitch, the measurement accuracies of Z(7) and Z(14) apparently increase.
16
Full optical column characterization of DUV lithographic projection tools
Mark van de Kerkhof, Wim de Boeij, Haico Kok et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2004 · 59 citations
Natural Sciences, Biomedical Engineering, Digital Imaging +15