Japanese Journal of Applied Physics · 2014 · 14 citations · 21 references
EngineeringElectrical EngineeringMaterials ScienceMicroelectronicsNanotechnologySemiconductor DevicesDevice ModelingDevice ScalingIntegrated Circuit DesignMemory DevicesMemory ModelingNanoelectronics3D Nand ArchitectureCell DesignFlash Memory DevicesMemory Cell DesignMemory Circuit DesignNand Flash MemoryNanoelectronic Memory DevicesThree-dimensional Memory
A cell design for three-dimensional (3D) stackable NAND (3D NAND) flash memory are investigated with emphases on control gate length ( L g ), spacing ( L space ) and channel hole diameter (Φ). The requirements for the L g and L space are derived from the 3D device simulation and the effective cell size that competes with the planar NAND. The simulations reveal that L g = L space = 20 nm (40 nm layer pitch) is achievable for bit-cost scalable (BiCS)-type 3D NAND with the 90 nm diameter hole. If the number of stacked layers is 22 with the layer pitch of 40 nm, the effective cell size of the 3D NAND corresponds to that of 15 nm planar NAND technology. Furthermore, cell characteristics of the macaroni body channel with various Φ are investigated. Although macaroni body channel improves cell characteristics at Φ = 90 nm, a cell with Φ = 60 nm without macaroni body structure shows better characteristics.
21
New ultra high density EPROM and flash EEPROM with NAND structure cell
F. Masuoka, M. Momodom, Yoichi Iwata et al. · 1987 · 183 citations
Engineering, Computer Engineering, Electrical Engineering +14