Electrochemical and Solid-State Letters · 2011 · 22 citations · 18 references
EngineeringElectrical EngineeringMaterials ScienceMicroelectronicsSemiconductor DevicesSemiconductor MaterialsDevice ReliabilitySemiconductor Device MaterialsSemiconductor PhysicsSemiconductor ReliabilityWide-bandgap Semiconductor DevicesWide-bandgap SemiconductorsGallium Nitride (Gan) MaterialsGallium Nitride Power DevicesGate Oxide DegradationHigh-electron-mobility TransistorsSchottky BarriersSchottky ContactsVoltageVoltage Stress Reliability
By replacing the commonly used Ni/Au gate metallization with Pt/Ti/Au, the critical voltage for degradation of AlGaN/GaN High Electron Mobility Transistors (HEMTs) during off-state biasing stress was significantly increased. The typical critical voltage for HEMTs with Ni/Au gate metallization was around −55 V. By sharp contrast, no critical voltage was observed for the HEMTs with Pt/Ti/Au gate metallization, even up −100 V, which was the instrumental limitation in this experiment. Both Schottky forward and reverse gate characteristics of the Ni/Au degraded once the gate voltage passed the critical voltage of −55 V. There was no degradation exhibited for the HEMTs with Pt-gated HEMTs.
18
GaN: Processing, defects, and devices
S. J. Pearton, J.C. Zolper, R. J. Shul et al. · Journal of Applied Physics · 1999 · 1.8K citations
30-W/mm GaN HEMTs by Field Plate Optimization
Yifeng Wu, A. Saxler, M. Moore et al. · IEEE Electron Device Letters · 2004 · 1.1K citations
Jesús A. del Alamo, Jungwoo Joh · Microelectronics Reliability · 2009 · 483 citations