Journal of The Electrochemical Society · 2006 · 35 citations · 7 references
Natural SciencesMaterials EngineeringMaterials ScienceSemiconductor DevicesSemiconductor MaterialsThin FilmsChemical Vapor DepositionSurface PhysicsThin Film AnnealingThin Film Electrical PropertiesThin-film DepositionThin-film MaterialsConformalityContact ResistanceFilm ConformalityLow-temperature DepositionMetal-organic Chemical Vapor DepositionMetalorganic Chemical Vapor DepositionResistivitySilicide Contacts
Highly conformal Co thin films were deposited on trenches with an aspect ratio of 13 by metallorganic chemical vapor deposition (MOCVD) using as a precursor in a low-temperature regime of where the growth rate was . Lowering the pressure of the process reduces the number of collisions in the gas phase and, thus, widens the temperature regime in which the surface reaction controls the growth rate. A processing pressure of allows for conformal deposition only at , whereas deposition at a reduced pressure of widens the temperature regime in which excellent conformality can be obtained. The conformal Co thin film, produced at and , showed a resistivity of and contained 1.0 atom % oxygen and less than 1.0 atom % carbon. After annealing this film at , its resistivity was reduced to , which is close to the bulk resistivity of Co. Therefore, this low-temperature process, which allows for the excellent conformal deposition of pure Co films, can be utilized to produce silicided contacts for advanced devices which require a low contact resistance and good electrical performance.
7
Atomic layer deposition of transition metals
Booyong S. Lim, Antti Rahtu, Roy G. Gordon · Nature Materials · 2003 · 656 citations
Natural Sciences, Materials Engineering, Materials Science +11
Studies of cobalt thin films deposited by sputtering and MOCVD
Yongmin Ko, D.S. Park, B. S. Seo et al. · Materials Chemistry and Physics · 2003 · 60 citations
Natural Sciences, Materials Engineering, Materials Science +12