Mechanical Properties, Water Vapor Permeability, and Moisture Contents of β-Lactoglobulin and Whey Protein Films Using Multivariate Analysis

Martin Anker, Mats Stading, Anne‐Marie Hermansson

Journal of Agricultural and Food Chemistry · 1998 · 42 citations · 16 references

Concepts

Abstract

Mechanical and barrier properties of β-lactoglobulin (β-Lg) and whey protein isolate (WPI) films were studied using sorbitol (S) as a plasticizer. The films were cast from heated aqueous solutions and dried in a climate chamber at 23 °C and 50% relative humidity for 16 h. The multivariate analysis used has proved to be a valuable tool for evaluating and quantifying the influences of the variables in the specified experimental domain. Two identical factorial designs were applied to evaluate the influence of the concentration of β-Lg and WPI, the concentration of S, and the pH. The two materials, β-Lg and WPI, show similar results, which can be attributed to the dominating protein β-lactoglobulin. At pH 9, Young's modulus and stress at break are not affected when the concentration of β-Lg, WPI, or S varies. At pH 7 and 8, Young's modulus and stress at break increase when the concentration of β-Lg and WPI increases, and they decrease when the concentration of S increases. Strain at break increases when pH increases from 7 to 9, a more pronounced effect being observed for the WPI films. Water vapor permeability (WVP) decreases and increases for pH 7 and 9, respectively, as the concentration of β-Lg and WPI increases. This contrast in behavior at different pH values is probably due to a structural difference that occurs above pH 8. Moisture content and WVP increase when S increases. Here a clear distinction can be observed between the two film materials: the β-Lg films show higher values for both moisture content and WVP measurements. Keywords: β-Lactoglobulin; whey protein; mechanical properties; water vapor permeability; moisture content; multivariate analysis

References

16