Bioplastic Properties of Sago-PVA Starch with Glycerol and Sorbitol Plasticizers

SW Lusiana, Desiana Nuriza Putri, Ida Z Nurazizah, Bahruddin

Journal of Physics Conference Series · 2019 · 48 citations · 11 references

DOIFull text

Open access

Concepts

Abstract

Abstract This study describes the making of sago starch bioplastics using glycerol and sorbitol plasticizers with the addition of PVA and chitosan filler. It purposes to compare the effect between the addition of glycerol and sorbitol plasticizers. Bioplastic samples of sago-PVA starch have been made from a mixture of sago starch and chitosan solution that had been dissolved with acetic acid, glycerol/sorbitol plasticizer, and PVA was printed and left in the air for 24 hours, then dried in the oven for 12 hours. Testing the mechanical properties of tensile strength refers to ASTM D882 then tearing strength testing based on method C in JIS K 7128 standard. In addition to testing mechanical properties, morphological tests were also referred to as the JSM-6390A standard and biodegradability tests were carried out qualitatively with DIN EN ISO standards 846, and this Water Uptake test was referred to the ASTM-D570-98 standard. This study found that the glycerol plasticizers have a better value than other comparable materials in biodegradation testing with a value of 82.38%, However, in tensile strength test, sorbitol has better value than other material, namely with the best tensile strength value of 16.12 MPa, 142.05% in elongation, tear strength of 12,729 kgf/mm, and water uptake value of 10.34%.

References

11