2012 · 11 citations · 17 references
EngineeringComputer EngineeringComputer ScienceComputer ArchitectureSemiconductor DevicesSystem-on-chip DesignChip PackagingDesign For TestabilityInterconnect DesignMemory DevicesPhysical Design3D Integrated Circuits3D Stacked MemoryArea Overhead AnalysisBuilt-in Self-repairDie ArchitectureFlip-chip BondingForm Factor OptimizationMemory Built-in Self-repair
3D ICs based on Through-Silicon-Vias (TSVs) enable the stacking of logic and memory dies to manufacture chips with higher performance, lower power, and smaller form factor. To improve the yield of the memory dies in 3D ICs, this paper proposes a Built-In Self-Repair (BISR) architecture which allows the sharing of spares between different layers of dies. The corresponding pre-bond (before the memory dies are bonded together) and post-bond (after the memory dies are bonded together) test flow is presented as well. In order to maximize the yield gain introduced by the cross-die spares, a die matching algorithm is proposed to determine which dies should be stacked together, so that the spare sharing can be most efficient. Experimental results show that the area overhead of the proposed BISR circuit is only 2.43%, which can be smaller if larger logic and memory dies are adopted, and the yield gain achieved by cross-die spare sharing can be up to 23%.
17
Die Stacking (3D) Microarchitecture
Bryan Black, Daniel Pantuso, Paul A. Reed et al. · 2006 · 599 citations
3D-Stacked Memory Architectures for Multi-core Processors
Gabriel H. Loh · 2008 · 436 citations
Processor Design in 3D Die-Stacking Technologies
Gabriel H. Loh, Yuan Xie, Bryan Black · IEEE Micro · 2007 · 290 citations