IEEE Electron Device Letters · 2000 · 46 citations · 10 references
EngineeringElectrical EngineeringGround ImprovementMicroelectronicsSemiconductor DevicesComplementary Metal-oxide-semiconductor TechnologyDevice CharacterizationHigh-frequency Semiconductor DevicesIntegrated Circuit DesignNoise In Electronic DevicesNoise In Semiconductor DevicesDevice Noise CharacterizationDevice Sizing For Noise ReductionGate Layout DesignLayout Techniques For Noise ReductionLow-noise DesignLow-noise Pad DesignMosfet NoiseNoise-aware Layout
Several 0.35 μm n-MOSFETs with different gate geometry were analyzed to maximize the RF performance, after that the pads were shielded to ground to reduce the noise contribution of pads. The F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">min</sub> of 0.5 dB was improved by utilizing the ground-shielded pads, and the F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">min</sub> of 0.2 dB was improved by using the double-sided gate contact type. The n-MOSFET having the single-sided gate contact and ground-shielded pad showed the F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">min</sub> of 0.46 dB and 0.37 dB at 2 GHz with the drain current of 2.0 mA and 5.3 mA, respectively. Furthermore, the weak frequency dependency of the F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">min</sub> showed a great possibility of a low noise amplifier above 5 GHz.
10
An effective gate resistance model for CMOS RF and noise modeling
Xiaodong Jin, Jia-Jiunn Ou, Chih‐Hung Chen et al. · 2002 · 166 citations
Future perspective and scaling down roadmap for RF CMOS
E. Morifuji, H.S. Momose, T. Ohguro et al. · 1999 · 94 citations