Characterization and implementation of self-aligned TiSi/sub 2/ in submicrometer CMOS technology

N. Parekh, H. Roede, A. Boś, A. G. M. Jonkers, R.D.J. Verhaar

IEEE Transactions on Electron Devices · 1991 · 24 citations · 13 references

Concepts

Abstract

Characterization and process implementation of a self-aligned TiSi/sub 2/ in a submicrometer CMOS process are presented. The effects of different in situ sputter etch configurations prior to Ti deposition on silicidation is discussed. It is shown that bridging is not only first RTP time- and temperature-dependent, but also dependent on the Ti(N) overetch time. The C49 to C54-TiSi/sub 2/ phase transformation is found to be dependent on both the C49-TiSi/sub 2/ film thickness and the linewidth. A potential degradation phenomenon with high-temperature back-end processing is discussed, and the impact of TiSi/sub 2/ on specific contact resistance and circuit performance is presented. Thin film analysis was done by Auger electron spectrometry, Rutherford backscattering spectrometry with 2-MeV He/sup +/, transmission electron microscopy, secondary ion mass spectrometry, X-ray diffraction, and X-ray fluorescence spectrometry. Sheet resistance measurements were carried out with a four-point probe.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

References

13