Applied Physics Letters · 2010 · 66 citations · 15 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsMicroelectronicsSemiconductor DevicesDevice CharacterizationDevice ModelingIon ImplantationSemiconductor Device MaterialsWide Band Gap SemiconductorsWide-bandgap Semiconductor DevicesCurrent DensityCurrent Density DistributionDevice IsolationGallium Nitride (Gan) MaterialsGallium Nitride Power DevicesGate Oxide LeakageHigh-electron-mobility Transistor ModelingLeakage Current Modeling
Nitrogen ion-implanted AlGaN/GaN high electron mobility transistor structures showed an isolation blocking voltage of 900 V with a leakage current at 1 μA/mm across an implanted isolation-gap of 10 μm between two Ohmic pads. The effect of implanted gap distance (1.7, 5, or 10 μm) between two Ohmic contact pads was evaluated. The isolation current density was determined to be solely dependent on the applied field between the contact pads. A model using a combination of resistive current and Poole–Frenkel current is consistent with the experimental data. The resistance of the isolation implantation region significantly decreased after the sample was annealed at temperatures above 600 °C.
15
GaN: Processing, defects, and devices
S. J. Pearton, J.C. Zolper, R. J. Shul et al. · Journal of Applied Physics · 1999 · 1.8K citations
S. O. Kucheyev, J. S. Williams, S. J. Pearton · Materials Science and Engineering R Reports · 2001 · 413 citations
AlGaN/GaN HEMTs grown on SiC substrates
S.C. Binari, Joan M. Redwing, G. Kelner et al. · Electronics Letters · 1997 · 161 citations