2010 · 41 citations · 20 references
EngineeringMechanical EngineeringRobotics EngineeringIndustrial RoboticsRobot DynamicsRoboticsFriction ModelingInverse DynamicsInverse KinematicsManipulator DynamicsRobot ManipulatorsSerial Robot KinematicsDry SlidingDynamic Model IdentificationDynamic System IdentificationFrictionFriction EstimationFriction Parameter EstimationViscous Friction ModelWorm Gears
Usually, the joint transmission friction model for robots is composed of a viscous friction force and of a constant dry sliding friction force. However, according to the Coulomb law, the dry friction force depends linearly on the load driven by the transmission. It follows that this effect must be taken into account for robots working with large variation of the payload or inertial and gravity forces, and actuated with transmissions as speed reducer, screw-nut or worm gear. This paper proposes a new inverse dynamic identification model for n degrees of freedom (dof) serial robot, where the dry sliding friction force is a linear function of both the dynamic and the external forces, with a velocity-dependent coefficient. A new identification procedure groups all the joint data collected while the robot is tracking planned trajectories with different payloads to get a global least squares estimation of inertial and new friction parameters. An experimental validation is carried out with a joint of an industrial robot.
20
Friction Models and Friction Compensation
Henrik Olsson, Karl Johan Åström, Carlos Canudas de Wit et al. · European Journal of Control · 1998 · 1.6K citations
Optimal robot excitation and identification
Jan Swevers, Chris Ganseman, Dilek Bilgin Tükel et al. · IEEE Transactions on Robotics and Automation · 1997 · 634 citations · Full text
Engineering, Mechanical Engineering, Robotics Engineering +14
Control of Machines with Friction
Brian Armstrong-He ́louvry, Andres Soom · Journal of Tribology · 1992 · 616 citations · Full text
Engineering, Electrical Engineering, Mechanical Engineering +10