IEEE Electron Device Letters · 2018 · 19 citations · 18 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsIii-v SemiconductorsP-n JunctionsSemiconductor Device MaterialsSemiconductor PhysicsWide Band Gap SemiconductorsWide-bandgap SemiconductorsBreakdown VoltageCurrent DensityElectrical PropertiesEpitaxial Growth Of Wide-bandgap SemiconductorsGallium Nitride Power DevicesHigh-voltage BreakdownJunction Ideality FactorP-n Junction Characteristics
High-performance vertical GaN-based p-n junction diodes fabricated using bandgap selective photoelectrochemical etching-based epitaxial liftoff (ELO) from bulk GaN substrates are demonstrated. The epitaxial GaN layers and pseudomorphic InGaN release layer were grown by MOCVD on bulk GaN substrates. A comparison study was performed between devices after liftoff processing (after transfer to a Cu substrate) and nominally identical control devices on GaN substrates without the buried release layer or ELO-related processing. ELO and bonded devices exhibit nearly identical electrical performance and improved thermal performance, compared with the control devices on full-thickness GaN substrates. The breakdown voltage, ideality factor, and forward turn-ON performance were found to be nearly identical, indicating that the transfer process does not degrade the quality of the p-n junctions. The devices exhibit turn-ON voltages of 3.1 V at a current density of 100 A/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , with a specific ON-resistance (R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">ON</sub> ) of 0.2-0.5 mQ · cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> at 5 V and a breakdown voltage (V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">br</sub> ) of 1.3 kV. Both optical and electrical characterization techniques show that the thermal resistance of ELO devices bonded to a Cu carrier is approximately 30% lower than that for control devices on GaN substrates.
18
The 2018 GaN power electronics roadmap
Hiroshi Amano, Yannick Baines, Edward Beam et al. · Journal of Physics D Applied Physics · 2018 · 1.3K citations · Full text