Journal of Micromechanics and Microengineering · 2011 · 11 citations · 11 references
EngineeringElectrical EngineeringMicroelectronicsMicrofabricationSemiconductor DevicesMicromachiningPressure MeasurementPressure SensorsThin Film EtchingAtmospheric PressureDeep EtchingEtchingPressure DependenceSilicon MicromachiningSilicon NitrideSilicon On Insulator MicromachiningSilicon-on-insulator Processing
The operation of a bulk micromachined Pirani vacuum gauge at atmospheric pressure is demonstrated. The device is fabricated on a silicon-on-insulator (SOI) wafer with a 5 µm thick device layer by using a one-mask, deep etching process. The 250 nm wide vertical gap fabricated by the deep etching of silicon has made operation at atmospheric pressure possible. The pressure range dependence on the change in the length of the heater and the length of the gap is discussed. Further, the performance dependence on different gaps is measured using 1.5 µm and 5.5 µm wide gaps. Measurement from 4 to 101 300 Pa is performed, and high sensitivity from 1000 to 101 300 Pa is confirmed.
11
Frédéric Marty, Lionel Rousseau, Bassam Saadany et al. · Microelectronics Journal · 2005 · 300 citations
A micro-Pirani vacuum gauge based on micro-hotplate technology
F.T. Zhang, Zhenan Tang, Jianliang Yu et al. · Sensors and Actuators A Physical · 2005 · 119 citations