Nanoscale Research Letters · 2014 · 22 citations · 14 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsOptical MaterialsSemiconductor DevicesChemical Vapor DepositionDislocations In SemiconductorsLight-emitting DiodesSemiconductor Crystal GrowthSemiconductor Device MaterialsWide-bandgap Semiconductor DevicesCrystal Quality ControlCrystalline StructureDislocation DensityFlip-chip Light-emitting DiodesGallium NitrideGallium Nitride Light-emitting DiodesLight-emitting DevicesUltraviolet Light-emitting Diodes
The flip chip ultraviolet light-emitting diodes (FC UV-LEDs) with a wavelength of 365 nm are developed with the ex situ reactive plasma deposited (RPD) AlN nucleation layer on patterned sapphire substrate (PSS) by an atmospheric pressure metal-organic chemical vapor deposition (AP MOCVD). The ex situ RPD AlN nucleation layer can significantly reduce dislocation density and thus improve the crystal quality of the GaN epitaxial layers. Utilizing high-resolution X-ray diffraction, the full width at half maximum of the rocking curve shows that the crystalline quality of the epitaxial layer with the (RPD) AlN nucleation layer is better than that with the low-temperature GaN (LT-GaN) nucleation layer. The threading dislocation density (TDD) is estimated by transmission electron microscopy (TEM), which shows the reduction from 6.8 × 10(7) cm(-2) to 2.6 × 10(7) cm(-2). Furthermore, the light output power (LOP) of the LEDs with the RPD AlN nucleation layer has been improved up to 30 % at a forward current of 350 mA compared to that of the LEDs grown on PSS with conventional LT-GaN nucleation layer.
14
Shuji Nakamura, Masayuki Senoh, Shin‐ichi Nagahama et al. · Applied Physics Letters · 1998 · 732 citations
Motokazu Yamada, Tomotsugu Mitani, Yukio Narukawa et al. · Japanese Journal of Applied Physics · 2002 · 375 citations
X-ray diffraction analysis of the defect structure in epitaxial GaN
H. Heinke, V. Kirchner, S. Einfeldt et al. · Applied Physics Letters · 2000 · 323 citations
Natural Sciences, Materials Engineering, Materials Science +17