Interface engineering of a ZrO2/SiO2/Si layered structure by <i>in situ</i> reoxidation and its oxygen-pressure-dependent thermal stability

Heiji Watanabe

Applied Physics Letters · 2001 · 59 citations · 10 references

Concepts

Abstract

Reactions at ZrO2/SiO2/Si interfaces during fabrication and postannealing have been studied in detail. The layered structures were fabricated by deposition of a thin Zr layer on a chemical oxide, followed by oxidation in an UHV chamber without air exposure (i.e., in situ reoxidation). On-line x-ray photoelectron spectroscopy was used to show that in situ reoxidation can be used for precisely designing interfacial structures. It was found that the thermal stability of ZrO2/SiO2/Si interfaces crucially depends on oxygen ambient; that is, while the interfaces are stable up to 900 °C under UHV conditions, annealing in 1×10−4 Torr oxygen results in formation of interfacial Zr silicate. Moreover, the ZrO2 overlayer was found to accelerate the interfacial oxidation reaction.

References

10