Applied Physics Letters · 1999 · 131 citations · 13 references
EngineeringElectrical EngineeringMaterials ScienceOptoelectronicsSemiconductor DevicesSemiconductor MaterialsLaser DiodesLaser PhysicsOptoelectronic DevicesQuantum DotsSemiconductor HeterostructuresSemiconductor LasersDifferential Quantum EfficiencyExcited StatesHeterostructure LasersHeterostructuresLasersMolecular Beam EpitaxySemiconductor Laser DiodesSemiconductor Quantum Dots
An InAs quantum dot (QD) array covered by a thin InGaAs layer was used as the active region of diode lasers grown by molecular beam epitaxy on GaAs substrates. The wavelength of the ground-state transition in such heterostructures is in the 1.3 μm range. In the laser based on the single layer of QDs, lasing proceeds via the excited states due to insufficient gain of the ground level. Stacking of three QD planes prevents gain saturation and results in a low threshold (85 A/cm2 in broad-area 1.9-mm-long stripe) long-wavelength (1.25 μm) lasing at room temperature via the QD ground state with relatively high differential efficiency (>50%).
13
1.3 μm photoluminescence from InGaAs quantum dots on GaAs
Richard P. Mirin, J. P. Ibbetson, Kenichi Nishi et al. · Applied Physics Letters · 1995 · 246 citations
1.3-μm continuous-wave lasing operation in GaInNAs quantum-well lasers
K. Nakahara, Masahiko Kondow, T. Kitatani et al. · IEEE Photonics Technology Letters · 1998 · 219 citations