Controlled Growth of TaN, Ta<sub>3</sub>N<sub>5</sub>, and TaO<i><sub>x</sub></i>N<i><sub>y</sub></i> Thin Films by Atomic Layer Deposition

Mikko Ritala, Pia Kalsi, Diana Riihelä, Kaupo Kukli, Markku Leskelä, Janne J. Jokinen

Chemistry of Materials · 1999 · 158 citations · 30 references

Concepts

Abstract

TaN, Ta 3 N 5, and TaO x N y films were deposited by the atomic layer deposition technique. The alternate surface reactions between TaCl 5 and NH 3 resulted in Ta 3 N 5 films, but when elemental zinc, serving as an additional reducing agent, was supplied on the substrates between the TaCl 5 and NH 3 pulses, TaN with a resistivity of 9 × 10 - 4 Ω cm was obtained. TaO x N y films were grown by depositing first thin Ta 3 N 5 layers which were then partially oxidized by single water pulses. By varying the number of the Ta 3 N 5 deposition cycles between the water pulses, the oxygen-to-nitrogen ratio of the films was controlled. The permittivity of the TaO x N y films was around 30 which is somewhat higher than that of Ta 2 O 5 .

References

30