Low-temperature preparation of GaN-SiO2 interfaces with low defect density. I. Two-step remote plasma-assisted oxidation-deposition process

Choelhwyi Bae, G. Lucovsky

Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 2004 · 31 citations · 23 references

Concepts

Abstract

In previous studies, device-quality Si-SiO2 interfaces and dielectric bulk films (SiO2) were prepared using a two-step process: (i) remote plasma-assisted oxidation (RPAO) to form a superficially interfacial oxide (∼0.6nm) and (ii) remote plasma-enhanced chemical vapor deposition (RPECVD) to deposit the oxide film. The same approach has been applied to the GaN-SiO2 system. Without an RPAO step, subcutaneous oxidation of GaN takes place during RPECVD deposition of SiO2, and on-line Auger electron spectroscopy indicates a ∼0.7-nm subcutaneous oxide. The quality of the interface and dielectric layer with/without RPAO process has been investigated by fabricated GaN metal-oxide-semiconductor capacitors. Compared to single-step SiO2 deposition, significantly reduced defect state densities are obtained at the GaN-SiO2 interface by independent control of GaN-GaOx interface formation by RPAO and SiO2 deposition by RPECVD.

References

23