2014 · 18 citations · 6 references
Natural SciencesMaterials EngineeringMaterials ScienceMetallic MaterialsMetallurgyThin FilmsElectroless PlatingGlass MaterialsGlass PackagingThin Film AdhesionCopper Electroless PlatingCopper MetallizationLinersMetallizationPeel StrengthPlatingThermal ShockThermal Shock Testing
Direct metallization of bare glass with copper is required to reach the full potential low-cost benefit of glass interposers. However, this poses a fundamental materials challenge associated with copper-to-glass adhesion. Intermediate polymer liners on glass have been used by others, adding an extra material and processing step. In this paper, three approaches to direct metallization of copper to glass interposers are explored and reported. Electroless plating, sputtering followed by electrolytic plating, and sol-gel were investigated as Cu deposition methods with an emphasis on adhesion and reliability of copper to bare glass. The adhesion and reliability performance of films were characterized by tape-testing, peel-strength measurements, and thermal-shock testing. Based on these results, individual assessments are made for each approach and compared with others to assess future directions.
6
Vijay Sukumaran, Tapobrata Bandyopadhyay, Venky Sundaram et al. · IEEE Transactions on Components Packaging and Manufacturing Technology · 2012 · 273 citations
Through-package-via formation and metallization of glass interposers
Vijay Sukumaran, Qiao Chen, Fuhan Liu et al. · 2010 · 123 citations
C. Jouwersma · Journal of Polymer Science · 1960 · 32 citations