IEEE Transactions on Automatic Control · 1985 · 993 citations · 10 references
EngineeringMechanical EngineeringRobotics EngineeringPath PlanningRobot ControlRoboticsManipulator ControlManipulator DynamicsMotion ControlRobot ManipulatorsRobot Motion PlanningTrajectory GenerationControl AlgorithmsDynamics Of Robotic ManipulatorsMinimum-time ControlMotion Planning For ManipulatorsPath TrackingPath Tracking ControlRobot Path PlanningTrajectory Planning
Robot control is traditionally split into path planning and tracking, a strategy that simplifies handling complex dynamics but often neglects timing, reducing overall efficiency. This paper aims to reduce that inefficiency by planning minimum‑time motion along a specified geometric path while respecting torque/force limits. The authors model the manipulator dynamics with parametric functions encoding geometric constraints, transform torque limits into parameter bounds, and compute a minimum‑time trajectory using a phase‑plane algorithm. Numerical examples confirm the effectiveness of the proposed minimum‑time planning method.
Conventionally, robot control algorithms are divided into two stages, namely, path or trajectory planning and path tracking (or path control). This division has been adopted mainly as a means of alleviating difficulties in dealing with complex, coupled manipulator dynamics. Trajectory planning usually determines the timing of manipulator position and velocity without considering its dynamics. Consequently, the simplicity obtained from the division comes at the expense of efficiency in utilizing robot's capabilities. To remove at least partially this inefficiency, this paper considers a solution to the problem of moving a manipulator in minimum time along a specified geometric path subject to input torque/force constraints. We first describe the manipulator dynamics using parametric functions which represent geometric path constraints to be honored for collision avoidance as well as task requirements. Second, constraints on input torques/ forces are converted to those on the parameters. Third, the minimum-time solution is deduced in an algorithm form using phase-plane techniques. Finally, numerical examples are presented to demonstrate utility of the trajectory planning method developed.
10
Optimal control theory: An introduction
W.S. Levine · IEEE Transactions on Automatic Control · 1972 · 1.6K citations
Elements of Hamiltonian Mechanics
D. ter Haar, F. W. Van Name · American Journal of Physics · 1962 · 177 citations · Full text