Nanomaterials · 2023 · 13 citations · 42 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsThermal AnalysisMetalsNanomechanicsThermal Expansion AnalysisThermal Properties Of MaterialsThermal StressesBondingBonding MechanismsThermal ExpansionThermal Expansion CoefficientThermal StrainThermal Strain AnalysisThermomechanical StressX-ray Diffraction Analysis
X-ray nanodiffraction was used to measure the thermal stress of 10 µm nanotwinned Cu bumps in Cu/SiO2 hybrid structures at −55 °C, 27 °C, 100 °C, 150 °C, and 200 °C. Bonding can be achieved without externally applied compression. The X-ray beam size is about 100 nm in diameter. The Cu bump is dominated by (111) oriented nano-twins. Before the hybrid bonding, the thermal stress in Cu bumps is compressive and remains compressive after bonding. The average stress in the bonded Cu joint at 200 °C is as large as −169.1 MPa. In addition, using the strain data measured at various temperatures, one can calculate the effective thermal expansion coefficient (CTE) for the 10 µm Cu bumps confined by the SiO2 dielectrics. This study reports a useful approach on measuring the strain and stress in oriented metal bumps confined by SiO2 dielectrics. The results also provide a deeper understanding on the mechanism of hybrid bonding without externally applied compression.
42
Ultrahigh Strength and High Electrical Conductivity in Copper
Lei Lu, Y.F. Shen, Xianhua Chen et al. · Science · 2004 · 3.3K citations
Natural Sciences, Materials Engineering, Materials Science +17
Revealing the Maximum Strength in Nanotwinned Copper
Lei Lu, Xiaofu Chen, Xiaoxu Huang et al. · Science · 2009 · 2.1K citations
Natural Sciences, Materials Engineering, Materials Science +17
Unidirectional Growth of Microbumps on (111)-Oriented and Nanotwinned Copper
Hsiang‐Yao Hsiao, Chien-Min Liu, Han-wen Lin et al. · Science · 2012 · 385 citations
Natural Sciences, Materials Engineering, Materials Science +13