IEEE Transactions on Robotics · 2020 · 51 citations · 31 references
EngineeringMechanical EngineeringMechatronics EngineeringActuatorsMechanical DesignRoboticsActuator DesignActuator IntegrationMuscle MechanicsSoft ActuatorsSoft Robot DesignArtificial Muscle ActuatorsArtificial MusclesForce-length RelationshipInflatable ActuatorsMuscle Force-length RelationshipPhysical Design ConstraintsPrinciple Of Virtual WorkStroke Length
The performance of inflatable artificial muscles depends greatly on their designs and the output shapes resulting from the geometric constraints. Although there have been attempts to apply physical constraints on the air chamber to achieve larger stroke lengths and increased force-length ratios, it has been difficult to achieve the above two goals while maintaining a compact form factor. In this article, we propose flat inflatable artificial muscles that have large contraction ratios (up to 0.5) and show increased forces in wider ranges of contractions by adding an internal geometric constraint. Addition of an external constraint, such as rigid plates, further increased the maximum contraction ratio (up to 0.553) through a synergistic effect. We show that various force-length relations can be achieved by adjusting the height of the plates. Theoretical models based on the geometry and the principle of virtual work are experimentally validated using actuator prototypes made of heat-sealable plastic sheets. Also, compact capacitive sensors are integrated in design for proprioceptive feedback of the proposed actuators, and their feasibility and effectiveness are experimentally evaluated through closed-loop control.
31
Pouch Motors: Printable Soft Actuators Integrated with Computational Design
Ryuma Niiyama, Xu Andy Sun, Cynthia Sung et al. · Soft Robotics · 2015 · 313 citations · Full text