IEEE Electron Device Letters · 1997 · 14 citations · 7 references
EngineeringElectrical EngineeringMaterials ScienceMicroelectronicsSemiconductor DevicesSemiconductor MaterialsDopingHigh-frequency Semiconductor DevicesSemiconductor Device MaterialsSemiconductor HeterostructuresSemiconductor PhysicsSemiconductor Thin FilmsCarrier Transport At High FrequencyCurrent GainCutoff FrequencyDoping Effects On Device PerformanceHeterostructure DevicesHigh-frequency ElectronicsModulation DopingTransconductance
We demonstrate the improvement of double-sided-doped InAlAs/InGaAs MODFETs by inserting a thin InAs layer in the center of the conventional InGaAs channel. A maximum extrinsic transconductance of 1.4 S/mm is achieved for 0.13-μm devices. The current gain cutoff frequency of this device is as high as 265 GHz. Delay time analysis shows a significant improvement in the effective saturated velocity, from 2.4×10/sup 7/ cm/s for LM devices to 3.1×10/sup 7/ cm/s for InAs devices. We believe the superior performance of this device is primarily due to the reduction of scattering from donor layers, especially under the channel, and the interface roughness, which is achieved by inserting a 4-nm InAs layer in the channel.
7
W-band low-noise InAlAs/InGaAs lattice-matched HEMTs
P.C. Chao, A.J. Tessmer, K.H.G. Duh et al. · IEEE Electron Device Letters · 1990 · 205 citations
K.B. Chough, C. Caneau, Won-Pyo Hong et al. · IEEE Electron Device Letters · 1994 · 32 citations
Youngwoo Kwon, D. Pavlidis, T. Brock et al. · IEEE Transactions on Electron Devices · 1995 · 26 citations