Journal of Microelectromechanical Systems · 2005 · 20 citations · 15 references
EngineeringMaterials EngineeringMaterials ScienceMicrofabricationSemiconductor DevicesThin FilmsChemical Vapor DepositionMems FabricationMicrofabrication ProcessesMicromachiningSemiconductor Device MaterialsSurface MicromachiningAtmospheric Pressure Chemical Vapor DepositionCarbonization ProcessesEpitaxial Film GrowthFilm DepositionMicromechanical OscillatorsSiliconSilicon CarbideSilicon Carbide (Sic) Materials
This manuscript is the first of a two-part series describing the fabrication and testing of MHz frequency, polycrystalline silicon-carbide (poly-SiC) micromechanical resonators made from films deposited by atmospheric-pressure chemical-vapor deposition (APCVD). In Part I, the development of deposition and patterning techniques suitable for the fabrication of vertically actuated, clamped-clamped beam resonant structures is detailed. Recipe development involved film deposition and material analysis on both planar and patterned substrates. We found that a carbonization-based deposition process modeled after epitaxial growth of 3C-SiC on Si produced the highest quality poly-SiC films for use with sub-micron thick polysilicon sacrificial layers, regardless of topology. Devices utilizing beam thicknesses up to 1 /spl mu/m were fabricated and successfully released. Details about the testing of the released structures are presented in Part 2 of this series (see Wiser, Tabib-Azar, Mehregan, and Zorman, "Polycrystalline silicon-carbide surface-micromachined vertical resonators-Part II: Electrical testing and material property extraction", J. Microelectromech. Syst., vol. 14, no. 3, Jun. 2005).
15
Silicon as a mechanical material
K. Petersen · Proceedings of the IEEE · 1982 · 2.9K citations
Monocrystalline silicon carbide nanoelectromechanical systems
Ya‐Tang Yang, K. L. Ekinci, Xuefei Huang et al. · Applied Physics Letters · 2001 · 287 citations · Full text