IEEE Journal of Solid-State Circuits · 2007 · 55 citations · 20 references
EngineeringComputer EngineeringElectrical EngineeringCircuit TheoryLow-power DesignMicroelectronicsDelay ModelingLow-power Digital Circuit DesignPower ManagementPower OptimizationTiming AnalysisTiming ModelingCircuit Delay ModelingDelay CharacterizationPower Reduction AnalysisSafety MarginVoltageVoltage-dependent Delay
A method is proposed to compensate for local delay variations by adjusting the supply voltage of individual circuit blocks. In-situ characterization of sub-blocks allows for voltage adjustment with minimum safety margin. Different strategies and circuit techniques for in-situ delay characterization of sub-blocks are described and compared. A dual V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">DD</sub> /power switch scheme is proposed for discrete voltage assignment to individual sub-blocks. Experimental results are presented for a test module based on an ARM9 core, fabricated in 130-nm CMOS. Yield improvement and power reduction capabilities are demonstrated by Monte Carlo simulations. For a typical setting, a reduction of 10% in power can be achieved with the proposed dual V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">DD</sub> /power switch concept. Using more than two supply voltages is shown to produce only small additional power savings at the price of high area overhead. The effect of the proposed scheme increases with increasing intra-die variability, which makes it suitable especially for future technologies.
20
Razor: a low-power pipeline based on circuit-level timing speculation
Dan Ernst, Nam Sung Kim, Shidhartha Das et al. · 2003 · 1.1K citations
Engineering, Computer Engineering, Electrical Engineering +16
Razor: a low-power pipeline based on circuit-level timing speculation
Daniel Ernst, Nam Sung Kim, Shidhartha Das et al. · 2004 · 842 citations
Engineering, Computer Engineering, Electrical Engineering +16