Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · 1999 · 11 citations · 13 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsMicrofabricationSemiconductor DevicesEtching ProcessesNanomechanicsResidual StressSilicon MaterialsThin Film EtchingThin-film PatterningAnisotropic EtchingDisplacementDry EtchingEtchingFinite Element ModelingProjection LithographySilicon EtchingSilicon Wafers
We have fabricated Si stencil reticles that are employed by a new type of e-beam projection lithography system (EB stepper). We applied a stress reduction technique to the Si membrane to improve the pattern placement accuracy. The residual stress of Si membranes which were fabricated by anisotropic etching of B-doped Si wafers in KOH aqueous solution was reduced by annealing at 1150 °C. We carried out pattern-displacement measurements for a Si stencil reticle made of a Si membrane where the residual stress was reduced to 10 MPa, and we observed that the pattern displacement error was reduced to less than 20 nm. Furthermore, the pattern displacement in the stencil reticle had a high correlation with the displacement determined from a simulation based on a finite element model. However in the same reticle, we discovered additional, comparatively small displacements in random directions, which was not expected in a membrane that had a homogeneous tensile stress. As a cause of the pattern displacement in random directions, we identified a pattern-width broadening in the dry etching process.
13
Densitometric and Electrical Investigation of Boron in Silicon
F. Hubbard Horn · Physical Review · 1955 · 145 citations