IEEE Transactions on Power Electronics · 2024 · 20 citations · 23 references
EngineeringElectrical EngineeringPower ElectronicsSemiconductor DevicesThermal AnalysisDevice CharacterizationDevice ReliabilityOxide SemiconductorsSemiconductor ReliabilityBias Temperature InstabilityBuck ConvertersGate Oxide DegradationGate Oxide ReliabilityOxide ReliabilityReliability Analysis Of Power ElectronicsReliability DegradationReliability Degradation Mechanisms
Gate oxide degradation under dynamic gate stress has been demonstrated as a reliability issue for SiC MOSFETs recently. Investigating the influence of dynamic drain-source voltage stress ( <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">V<sub>DS</sub></i> ) and load current ( <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">I<sub>L</sub></i> ) involved in switching operation on gate oxide degradation is very significant to identify the way for effectively assessing gate oxide reliability. In this article, a buck converter with continuous switching condition and constant high temperature is built and operated to evaluate gate oxide degradation. Moreover, the results from buck converter are compared to results regarding AC bias temperature instability (BTI) under the same conditions for devices with different gate structures. The degradation degree of different gate oxide locations under the two operations is analyzed combining I-V and split C-V characteristics. It is found that there is consistent degradation of the gate oxide above JFET region, but depending on the operation mode, the degradation is different above channel region, indicating that VDS and <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">I<sub>L</sub></i> have different effects on different gate oxide locations. Therefore, AC BTI test cannot sufficiently evaluate gate oxide degradation and may overestimate or underestimate its reliability, depending on the device structure and fabrication process. It is necessary to investigate the gate oxide reliability in typical switching operation.
23
Performance and ruggedness of 1200V SiC — Trench — MOSFET
Dethard Peters, Ralf Siemieniec, Thomas Aichinger et al. · 2017 · 149 citations
Engineering, Electrical Engineering, Materials Engineering +17
Gate Oxide Degradation of SiC MOSFET in Switching Conditions
Rémy Ouaida, Maxime Berthou, Javier León et al. · IEEE Electron Device Letters · 2014 · 133 citations
Engineering, Electrical Engineering, Materials Engineering +17
Behavior of NBTI under AC dynamic circuit conditions
W.W. Abadeer, W. Ellis · 2003 · 98 citations
Engineering, Electrical Engineering, Electronic Materials +16