IEEE Electron Device Letters · 2024 · 10 citations · 8 references
EngineeringComputational EngineeringElectrical EngineeringDesign OptimizationMicroelectronicsSemiconductor DevicesDevice CharacterizationDevice ModelingDevice SimulationMetal-oxide-semiconductor Field-effect TransistorsOxide SemiconductorsSemiconductor Device MaterialsBreakdown VoltageMetal-oxide-semiconductor Field-effect Transistor ModelingMetal-semiconductor Field-effect TransistorsMultiobjective Particle Swarm OptimizationOptimal DesignParticle Swarm OptimizationPower Electronics DevicesPower Mosfets
This work employed the particle swarm optimization (PSO) algorithm to assess the trade-off between breakdown voltage (BV) and on-state resistance (R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><i>DS,on</i></sub> ) in 4H–SiC metal oxide semiconductor field effect transistors (MOSFET) for power devices. In this work, the numerical model obtained after analyzing the resistance composition is utilized as the objective function in PSO to determine characteristic parameters in double-diffused metal oxide semiconductor field effect transistors (DMOSFET). These equations are input for the PSO algorithm. The derived characteristic parameters include the drift region doping concentration and thickness, cell size, channel length, JFET region length, JFET region thickness, and doping concentration. To adhere to common application constraints, this work optimizes these characteristic parameters to minimize the R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><i>DS,on</i></sub> under typical BV ranging from 100 to 2000 V. The R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><i>DS,on</i></sub> for some typical applications was extracted and validated through TCAD simulations to ensure algorithm accuracy. The reported results confirm that PSO yields superior outcomes and may be considered when designing devices. This work offers helpful insights into the design of characteristic parameters for 4H–SiC power DMOSFET devices and evaluates the feasibility of using PSO to optimize the characteristic parameters of power devices.
8
Ali Emadi, Alireza Khaligh, Claudio Rivetta et al. · IEEE Transactions on Vehicular Technology · 2006 · 901 citations
Engineering, Automotive Engineering, Electrical Engineering +17
Silicon carbide power MOSFETs: Breakthrough performance from 900 V up to 15 kV
John W. Palmour, Lin Cheng, Vipindas Pala et al. · 2014 · 293 citations