Architecture, Chip, and Package Codesign Flow for Interposer-Based 2.5-D Chiplet Integration Enabling Heterogeneous IP Reuse

Abstract

A new trend in system-on-chip (SoC) design is chiplet-based IP reuse using 2.5-D integration. Complete electronic systems can be created through the integration of chiplets on an interposer, rather than through a monolithic flow. This approach expands access to a large catalog of off-the-shelf intellectual properties (IPs), allows reuse of them, and enables heterogeneous integration of blocks in different technologies. In this article, we present a highly integrated design flow that encompasses architecture, circuit, and package to build and simulate heterogeneous 2.5-D designs. Our target design is 64core architecture based on Reduced Instruction Set Computer (RISC)-V processor. We first chipletize each IP by adding logical protocol translators and physical interface modules. We convert a given register transfer level (RTL) for 64-core processor into chiplets, which are enhanced with our centralized network-onchip. Next, we use our tool to obtain physical layouts, which is subsequently used to synthesize chip-to-chip I/O drivers and these chiplets are placed/routed on a silicon interposer. Our package models are used to calculate power, performance, and area (PPA) and reliability of 2.5-D design. Our design space exploration (DSE) study shows that 2.5-D integration incurs 1.29× power and 2.19× area overheads compared with 2-D counterpart. Moreover, we perform DSE studies for power delivery scheme and interposer technology to investigate the tradeoffs in 2.5-D integrated chip (IC) designs.