IEEE Robotics and Automation Letters · 2020 · 215 citations · 21 references
EngineeringAutomotive EngineeringAutonomous SystemsAutonomous VehiclesDistributed SystemsVehicle DynamicsAdaptive ControlDistributed ControlIntelligent Transportation SystemsVehicle ControlVehicle Control SystemsVehicle StabilityConnected VehiclesCooperative ControlDistributed Adaptive ControlFeedback LinearizationHighway EngineeringNonlinear Vehicle DynamicsPlatooningTraffic Congestion
Automatic cruise control of connected vehicle platoons has attracted attention for reducing congestion, increasing throughput, and improving highway safety. The paper proposes a two‑layer distributed control scheme to maintain string stability of a heterogeneous connected vehicle platoon moving at constant lead‑vehicle speed with a constant spacing policy. The scheme first applies feedback linearization to convert nonlinear vehicle dynamics into a linear heterogeneous state‑space model, then implements a distributed adaptive controller that uses only neighboring relative distance, velocity, and acceleration to preserve constant spacing and desired platoon velocity, with a spanning‑tree topology rooted at the leader. Simulations and hardware experiments with real robots confirm the effectiveness and practical feasibility of the proposed control scheme.
Automatic cruise control of a platoon of multiple connected vehicles in an automated highway system has drawn significant attention of the control practitioners over the past two decades due to its ability to reduce traffic congestion problems, improve traffic throughput and enhance safety of highway traffic. This paper proposes a two-layer distributed control scheme to maintain the string stability of a heterogeneous and connected vehicle platoon moving in one dimension with constant spacing policy assuming constant velocity of the lead vehicle. A feedback linearization tool is applied first to transform the nonlinear vehicle dynamics into a linear heterogeneous state-space model and then a distributed adaptive control protocol has been designed to keep equal inter-vehicular spacing between any consecutive vehicles while maintaining a desired longitudinal velocity of the entire platoon. The proposed scheme utilizes only the neighbouring state information (i.e. relative distance, velocity and acceleration) and the leader is not required to communicate with each and every one of the following vehicles directly since the interaction topology of the vehicle platoon is designed to have a spanning tree rooted at the leader. Simulation results demonstrated the effectiveness of the proposed platoon control scheme. Moreover, the practical feasibility of the scheme was validated by hardware experiments with real robots.
21