Japanese Journal of Applied Physics · 2019 · 39 citations · 18 references
Natural SciencesMaterials EngineeringMaterials ScienceInterface ScienceMetallic MaterialsMetallurgyMetallic BondingMetalsBondingBonding MechanismsBonding Temperature EffectsBonding Time EffectsCopper AlloysInterface BondingMetallurgical BondingRecrystallization At Bonded Interfaces
Abstract Cu-to-Cu direct bonding was successfully achieved in 10 s with 〈111〉-oriented nanotwinned Cu (nt-Cu) bumps in ambient N 2 . The bonding temperature and pressure were 300 °C and 90 MPa, respectively. A nearly void-free interface and a low bump resistance of 4.9 mΩ can be observed after a short-time bonding process. Besides, longer bonding times of 60 s and 30 s were employed, but the resistances of the Cu joints did not decrease significantly when the bonding time increased to 60 s. However, the nt-Cu columnar grains started to recrystallize during the 60 s bonding and started detwinning in 10 s bonding. Yet, the bonding interface remained under such a short bonding time.
18
Ultrahigh Strength and High Electrical Conductivity in Copper
Lei Lu, Y.F. Shen, Xianhua Chen et al. · Science · 2004 · 3.3K citations
Natural Sciences, Materials Engineering, Materials Science +17
Unidirectional Growth of Microbumps on (111)-Oriented and Nanotwinned Copper
Hsiang‐Yao Hsiao, Chien-Min Liu, Han-wen Lin et al. · Science · 2012 · 385 citations
Natural Sciences, Materials Engineering, Materials Science +13
Reliability challenges for copper interconnects
Baozhen Li, Timothy D. Sullivan, Tom C. Lee et al. · Microelectronics Reliability · 2003 · 285 citations