2019 · 35 citations · 21 references
EngineeringComputer EngineeringElectrical EngineeringFault-tolerant ComputingMicroelectronicsSemiconductor DevicesDefect ModelingDevice CharacterizationDevice ModelingDevice ReliabilityFault ModelingManufacturing DefectsDefect AnalysisElectrical Fault AnalysisFault AnalysisFault Occurrence ModelingFault SimulationHardware Fault ModelsManufacturingResistors
The STT-MRAM manufacturing process involves not only traditional CMOS process steps, but also the integration of magnetic tunnel junction (MTJ) devices, the data-storing elements. This paper demonstrates a paradigm shift in fault modeling for STT-MRAMs by performing defect modeling and fault analysis for MTJ pinhole defects which are seen as a key type of STT-MRAM manufacturing defects. A Verilog-A compact model for defect-free MTJ devices is built and calibrated with electrical measurements on actual MTJ wafers. MTJs with a pinhole defect are extensively characterized, both during manufacturing test (t=0) and in the field (t>0), and the data is used to extend our defect-free MTJ compact model to include parameterized pinhole defects. The model is then used to perform single-cell static fault analysis and this shows not only what kind of faults can occur in an STT-MRAM, but also that the conventional fault modeling approach based on linear resistors cannot catch such behavior.
21
Spin-Transfer Torque Memories: Devices, Circuits, and Systems
Xuanyao Fong, Yusung Kim, Rangharajan Venkatesan et al. · Proceedings of the IEEE · 2016 · 201 citations