2018 · 23 citations · 4 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsMicrofabricationSemiconductor DevicesIntegrated Circuit DesignInterconnect FabricsInterconnect TechnologyMetalsSemiconductor InterfacesWafer BondingDie-to-wafer BondingInterconnect Fabric IntegrationPlasma-activated BondingResistivityShear Strength AnalysisShear Strength ReductionThermal Device SimulationThermal Load Simulation
This paper describes the integration of a System-onWafer (SoW) assembly using test dielets mounted on a Silicon Interconnect Fabric (Si-IF) with an inter-dielet spacing of 100 μm and using 10 μm interconnect pitch. The continuity within and across the dielet assembly is shown using daisy chains of Au-capped Cu-Cu thermal compression bonds. The daisy chains run not only through every dielet but also across all the adjacently mounted dielets on the Si-IF. The interconnections exhibited an effective contact resistivity of 0.8-0.9 Ω-μm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> and an average shear strength of 125 MPa. Our investigations showed that Argon plasma pre-treatment improves the shear strength of the metal bonds by a factor of 5X. Thermal simulation of the SoW assembly showed superior heat spreading across the assembly in a checkerboard configuration of alternate hot (0.5 W/mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> ) and cold (0.1 W/mm2) dielets with an average temperature of 82 °C & 78 °C respectively.
4
Latency, Bandwidth and Power Benefits of the SuperCHIPS Integration Scheme
SivaChandra Jangam, Saptadeep Pal, Adeel Bajwa et al. · 2017 · 44 citations · Full text
Mark S. Goorsky, Kari Schjølberg‐Henriksen, Brett Beekley et al. · Japanese Journal of Applied Physics · 2017 · 11 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17