IEEE Transactions on Circuits and Systems I Regular Papers · 2016 · 22 citations · 26 references
EngineeringComputer EngineeringElectrical EngineeringMicroelectronicsSemiconductor DevicesVlsi DesignCmos Circuit DesignDevice ScalingLeakage Power ReductionMemory DevicesPhysical DesignStandard Cell DesignGate-level DesignLeakage PowerMemory Cell DesignMulti-threshold Voltage DesignPass-transistor LogicSiliconTransistor StackingUltra-low-voltage Circuit Design
In this study, design considerations for ultra low voltage (ULV) standard-cell based memories (SCM) are presented. Trade-offs for area cost, leakage power, access time, and access energy are discussed and realized using different read logic styles, latch architecture designs, and process options. Furthermore, deployment of multiple threshold voltages (V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">th</sub> ) options in a single standard-cell/bitcell enables additional architectural choices. Silicon measurements from five memory designs, optimized at the transistor level in conjunction with gate-level optimizations, are considered to demonstrate the different trade-off corners. Measurements show that substituting the storage element in an SCM with a D-latch using transistor stacking and channel length stretching results in lowest leakage power. Alternatively, a pass- transistor based latch as storage element reduces the area footprint at a cost of reduced access speed, which can be compensated by using a lower-V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">th</sub> pass-transistor. However, relatively high speed (tens of MHz) in the near- to subthreshold (sub-V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">th</sub> ) region is achievable if general purpose transistors are used instead of low power transistors. A discussion is included to illustrate when to implement ULV memories using SCMs and when to choose sub-V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">th</sub> SRAMs. The discussion shows that the border is between 4-6 kb, depending on the number of words and the wordlength configuration.
26
Stable SRAM cell design for the 32 nm node and beyond
L. Chang, David Fried, J. M. Hergenrother et al. · 2005 · 567 citations
Engineering, Computer Engineering, Electrical Engineering +17