IEEE Transactions on Microwave Theory and Techniques · 1993 · 80 citations · 16 references
EngineeringElectrical EngineeringMaterials ScienceMicroelectronicsSemiconductor DevicesSemiconductor MaterialsDevice CharacterizationDevice ModelingHigh-frequency Semiconductor DevicesIntegrated Circuit DesignMetal-oxide-semiconductor Field-effect TransistorsSemiconductor ReliabilityBreakdown VoltageDegradationHigh-electron-mobility TransistorsPower Added EfficiencyPower DensityPower EfficiencySurface EffectsSurface States
The authors determined that RF drain current degradation is responsible for the poor power performance of wide-recessed pseudomorphic high-electron-mobility transistors (PHEMTs). A model based on surface states was proposed to explain this phenomenon, which then led to the use of charge-screen layers and a double-recessed gate process to suppress surface effects. Combined, these two modifications increased the device's gate-drain reverse breakdown voltage without causing a degradation in the transistor's RF drain current. This allowed the simultaneous achievement of high power-added efficiency and high power density which established a new performance record for power PHEMTs at X- and Ku-bands. Delay time analysis of single- and double-recessed PHEMTs revealed that the benefit of a larger breakdown voltage in the latter device design came at the cost of a larger drain delay time. Drain delay accounted for 45% of the total delay when the 0.35- mu m double-recessed PHEMT was biased at V/sub ds/=6 V.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
16
Characterization of GaAs devices by a versatile pulsed I-V measurement system
A. Platzker, A. Palevsky, Samuel Nash et al. · 2002 · 80 citations
Engineering, Electrical Engineering, Electronic Materials +16