IEEE Electron Device Letters · 1995 · 16 citations · 4 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsMicroelectronicsSemiconductor DevicesDevice SimulationIntegrated Circuit DesignIntegrated Circuit DevicesIntegrated Circuit FabricationMetal-oxide-semiconductor Field-effect TransistorsSemiconductor Device MaterialsEmission PerformanceEtch RateFabricationGate LeakageGate Leakage CurrentLeakage Current ReductionSilicon-on-insulator TechnologyThermal Oxidation
We have successfully developed a fabrication process of a silicon field emitter array with a gate insulator formed by Si <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> N <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> sidewall formation and subsequent thermal oxidation. This process overcomes some problems in the conventional fabrication, such as high etch rate, low breakdown field, and gate hole expansion arising from evaporation of gate oxide. Therefore, we could improve process stability and emission performance, and also reduce gate leakage current. The optimum process conditions were determined by process simulations using SUPREM-4. The turn-on voltage of the fabricated field emitters was approximately 38 V. An anode current of 0.1 μA (1 μA) per tip was measured for a 625-tip array at the gate bias of 80 V (100 V), and the gate current was less than 0.3% of the anode current at those emission levels.
4
Simulation of field emission microtriodes
E.G. Zaidman · IEEE Transactions on Electron Devices · 1993 · 30 citations · Full text
Zengle Huang, N.E. McGruer, K. Warner · IEEE Electron Device Letters · 1993 · 10 citations