Journal of Microelectromechanical Systems · 2003 · 129 citations · 15 references
EngineeringElectrical EngineeringMaterials ScienceMicroelectromechanical SystemsMicroelectronicsSemiconductor DevicesDevice ReliabilityMems FabricationMems ReliabilityMems SwitchesMems TestingRf MemsElectrical Testing Of Mems DevicesLifetimesMems Reliability TestingOhmic Mems SwitchesOhmic Rf Mems SwitchesRf Mems FabricationRf Mems ReliabilityRf Mems Switches
This paper investigates the performance and lifetime of a metal-to-metal shunt RF MEMS switch fabricated on an SI-GaAs substrate. The switch is a shunt bridge design that is compatible with standard microelectronic processing techniques. The RF performance of the switch includes actuation voltages of less than 15 V, isolation better than 20 dB from 0.25 to 40 GHz, and switching speeds of less than 22 μs. Varying the geometry of the switch affects both switching voltage and reliability, and the tradeoffs are discussed. We have developed a cold switching test method to identify the root cause of sticking as a failure mechanism. The switch structure includes "separation posts" that eliminate sticking failure and has demonstrated lifetimes as high as 7×10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">9</sup> cold switching cycles. These results show that good reliability is possible with a metal-to-metal RF MEMS switch operated with a low actuation voltage.
15
Performance of low-loss RF MEMS capacitive switches
Charles L. Goldsmith, Zhimin Yao, S. Eshelman et al. · IEEE Microwave and Guided Wave Letters · 1998 · 428 citations
Lifetime characterization of capacitive RF MEMS switches
C. Goldsmith, J. Ehmke, A. Malczewski et al. · 2002 · 341 citations
Design of low actuation voltage RF MEMS switch
Sergio Pacheco, L.P.B. Katehi, Clark T.‐C. Nguyen · 2002 · 249 citations