IEEE Transactions on Electron Devices · 1988 · 77 citations · 16 references
EngineeringElectrical EngineeringMaterials ScienceMicroelectronicsSemiconductor DevicesSemiconductor MaterialsBipolar Junction TransistorsDevice ModelingHigh-frequency Semiconductor DevicesMicrowave Integrated CircuitsMicrowave Semiconductor DevicesRadio-frequency Integrated CircuitsHeterojunction Bipolar TransistorsHigh-frequency PerformanceMicrowave DevicesMillimeter-wave Integrated CircuitsMillimeter-wave TransistorsParasitic CapacitanceParasitic EffectsPhase Delay
Heterojunction bipolar transistor structure (HBTs) with 0.25-, 0.4-, and 0.6- mu m emitter stripe widths and ultrasubmicrometer base widths, which are designed to achieve minimum transit time and low parasitic effects, are examined for their millimeter-wave performance. In particular,the dependence of the unity current gain frequency (f/sub tau /), the maximum oscillation frequency (f/sub max/), and the stability of power gains on the device structure and material parameters are critically analyzed. It is shown that the classical f/sub max/ expression commonly used for bipolar transistors, involving the effective carrier transit time and the collector-based RC time constant does not adequately represent the performance of ultrasubmicrometer-based-width HBTs, where the transadmittance phase delay associated with the collector-base depletion layer transit time and the parasitic collector-based capacitance are significant. The expected ballistic and quasiballistic behaviour of electron in these ultrasubmicrometer structures, if properly designed, minimizes the effective carrier transit time effect, but its impact on the f/sub max/ by the excess transadmittance phase delay poses a more fundamental and serious high-frequency limiting factor for the realization of millimeter-wave HBTs than has been hitherto recognized. The accuracy and usefulness of the proposed analytical approach is demonstrated for a practical HBT structure with 1.2- mu m emitter stripe design, giving results that agree well with measurements.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
16
Models for contacts to planar devices
H.H. Berger · Solid-State Electronics · 1972 · 917 citations
Engineering, Electrical Engineering, Electronic Materials +5
Models for contacts to planar devices
Microelectronics Reliability · 1972 · 818 citations
Engineering, Electrical Engineering, Electronic Materials +5
Design Theory of Junction Transistors
J.M. Early · Bell System Technical Journal · 1953 · 108 citations